Recessed Outlet Box, DBHR1W-1 Low Profile Electrical Outlet Box with Weatherproof Cover for Flat Surface Retrofit Construction, No Lap, Horizontal, White






Recessed Outlet Box DBHR1W-1


⚡ Outdoor-ready recessed outlet box
🔧 Flat-surface retrofit friendly

Recessed Outlet Box 😅✨—for when you don’t want a box sticking out

Honestly, nobody loves the “lumpy wall” look. This low-profile recessed outlet box is designed to sit flush on flat-surface retrofits,
so your outlet cover looks tidy instead of like it’s trying to escape.

What this recessed electrical box is for

This DBHR1W-1 low profile enclosure is meant for recessed outlet installations where you want a smooth, finished look on flat surfaces.
It’s built as an all-in-one integrated structure—so you’re not hunting down extra wall plates, weather shields, or gaskets
just to get to the “ready to install” stage.

The biggest appeal is the straightforward install: the box slides into the wall cavity, and removable knock-outs are pre-cut
on multiple sides to help with wiring space. It’s also intended for outdoor-style setups, with a weatherproof cover designed
to help resist wind-driven cover blow-open, plus UV-stabilized materials to slow aging.

Quick fit reminder

Warm tip: measure your installation spot and double-check dimensions before purchase to make sure it fits your wall cavity.
Retrofit work is great—until a “close enough” opening turns into extra effort.

Compatible receptacles (sold separately)

Works with 15/20 Amp GFCI/GFI receptacles.

Where people commonly use it

Garages, patios, campgrounds, and public EV charging station areas—places where weatherproofing and a clean finish matter.

Key Features

Built for the “recessed” look

  • Low-profile recessed design to help keep the outlet area looking flush on flat-surface retrofits.
  • Fits multiple wall types, including flat foam walls, stucco, and cinder block walls (use case depends on your setup).
  • Integrated structure—comes fully assembled with essential parts, so you don’t have to buy multiple components separately.
  • Effortless installation with the box sliding into wall cavities; removable knock-outs are pre-cut on the sides, bottom, and back.
  • Weatherproof + corrosion resistant cover helps protect internal wiring and receptacles, including resistance to wind-driven cover issues.
  • UV-stabilized cover intended to slow material aging for longer-lasting outdoor use.
  • Recessed electrical enclosure sized to accommodate compatible 15/20 Amp GFCI/GFI receptacles (receptacle sold separately).

Why This Product Exists

Because walls deserve nice things

At some point, you’ll run into that classic problem: you want an outlet outdoors (or in a garage/patio area),
but you also want the install to look intentional—not like a plastic box taped onto the wall.
This recessed outlet box is designed for people who want a cleaner, smoother finish while still keeping the wiring area protected.

Best Fit For

Practical retrofit moments

  • DIY homeowners doing flat-surface retrofit projects who want a low-profile, recessed setup.
  • Professional electricians looking for a ready-to-install recessed enclosure with integrated components.
  • Outdoor or weather-exposed installs where a weatherproof cover is part of the plan.
  • Projects where you’re planning to use a compatible 15/20 Amp GFCI/GFI receptacle (sold separately).

Final Verdict

A tidy option for recessed outlets

If you’re aiming for a recessed outlet that looks flush on flat-surface retrofits, this low-profile enclosure is a solid,
straightforward choice. It’s especially appealing when you want an all-in-one structure and a cover designed for outdoor conditions.
Just make sure your measurements and wiring plan match up before you start sliding it into the wall.

Affiliate Disclosure: This post contains affiliate links. If you click and purchase through Amazon, I may receive a commission at no extra cost to you.

AI Image Disclaimer: This page does not include any images and does not use photos to represent the product.

AI Content Disclaimer: I’m sharing general product information based on the provided details, but you should review the listing on Amazon for the most accurate information.

Electrical/Battery Disclaimer: Electrical work can be hazardous. Always follow local electrical codes, use proper tools and safety practices, and consult a qualified electrician if you’re unsure.

Tool Safety Disclaimer: If you’re installing this yourself, wear appropriate safety gear and use tools correctly to avoid injury.

Privacy/Surveillance Disclaimer: This content is about an electrical outlet box only and does not relate to any surveillance or privacy features.


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top