3-5 Gpm Chemical 😄 Injector—because “more soap” shouldn’t mean “more mess.”
Honestly, it’s a little weird when your pressure washer cleaning plan is going great… until the soap situation is basically
“we’ll figure it out later.” This 3-5 Gpm chemical injector is the kind of replacement part that helps you keep downstream
chemical injection working the way it’s supposed to—so you can focus on getting things clean, not troubleshooting.
What this is (and why it’s useful)
This chemical injector (replacement part number 100775) is intended for general pump high pressure washers in the
3–5 GPM range. It’s designed to inject cleaning chemicals downstream as you spray, with a rated pressure of
4500 PSI and a maximum temperature of 190°F. It also uses a brass body for corrosion resistance,
and it’s built around a small orifice (2.1 mm) for chemical extraction.
Key Features
Matched for general pump pressure washers rated for 3–5 GPM (replacement part: 100775).
Rated for up to 4500 PSI and up to 190°F max.
3/8" NPT-Male inlet and 3/8" NPT-Male outlet, plus a 1/4" hose barb for the siphon hose.
Includes a flow-arrow marking to help with installation orientation.
Orifice is listed as 2.1 mm, with an injection capability up to 20% (as provided by the listing).
Made with brass, noted for corrosion resistance and durability for long-term use.
Why This Product Exists
This is basically for people who want their pressure washer to do more than just blast water—
they also want consistent downstream chemical injection. At some point, most setups run into the same problem:
the injector is worn, mismatched, or just not pulling chemical like it used to. A purpose-made replacement
like this is meant to help restore that downstream soap workflow.
Best Fit For
- People replacing a downstream chemical injector on a compatible general pump pressure washer.
- Setups that match the 3–5 GPM range and need a 4500 PSI-rated injector.
- Users who want to use a 1/4" siphon hose setup for chemical draw (as described in the listing).
- Anyone who prefers downstream injection during spray instead of manually applying soap.
Quick note: double-check your washer’s flow rate and connection style before ordering—compatibility matters more than people think.
Final Verdict
If your downstream soap injection isn’t behaving and you’ve confirmed your pressure washer setup lines up with the
100775 replacement part and 3–5 GPM profile, this injector is a straightforward, practical fix.
It’s not trying to be fancy—it’s trying to do the job: inject chemical downstream while you clean.
Affiliate Disclosure: I may earn a commission from qualifying purchases through Amazon links. This helps support the content you’re reading, at no extra cost to you.
AI Image Disclaimer: No images are shown or used in this post.
AI Content Disclaimer: This post was generated with AI assistance and is meant for general informational purposes only.
Electrical/Battery Disclaimer: This product listing content relates to a pressure washer accessory/injector and does not involve batteries or electrical power claims.
Tool Safety Disclaimer: Follow the pressure washer and chemical instructions from the manufacturer. Use eye/hand protection as appropriate and relieve water pressure safely before installing or adjusting components.
Cooling Performance Disclaimer: This post does not make cooling or temperature-management claims beyond the provided maximum temperature information.
Privacy/Surveillance Disclaimer: No surveillance or monitoring features are claimed or implied.